I continue my benchmarks of Intel SSD 910, previous time I compared it with Fusion-io ioDrive http://www.mysqlperformanceblog.com/2012/09/07/intel-ssd-910-in-tpcc-mysql-benchmark/. Now I want to test this card against RAID over spinning disks.
In benchmarks passion (see my two previous posts) I managed to setup all three devices (RAID was on board; Intel X25-E SSD connected to HighPoint controller, FusionIO card) on our working horse Dell PowerEdge R900 (btw, to do that I had to switch from CentOS 5.2 to Ubuntu 8.10, as CentOS was not able to […]
The cost of SSDs has been dropping rapidly, and at the time of this writing, 2.5-drives have reached the 1TB capacity mark. You can actually get inexpensive drives for as little as 60 cents per GB. Even inexpensive SSDs can perform tens of thousands of IOPs and come with 1.5M – 2M hous MTBF and […]
While working on the service architecture for one of our projects, I considered several SATA SSD options as the possible main storage for the data. The system will be quite write intensive, so the main interest is the write performance on capacities close to full-size storage. After some research I picked several candidates (I show […]
I continue my benchmarks of Intel SSD 910, the raw IO results are available in my previous experiment. Now I want to test this card under MySQL workload to see if the card is suitable to use with MySQL. Benchmark date: Sep-2012 Benchmark goal: Test Intel SSD 910 under tpcc-mysql workload and compare with baseline […]
Intel came on PCI-e SSD market with their Intel SSD 910 card. With a slogan “The ultimate data center SSD” I assume Intel targets rather a server grade hardware, not consumer level. I’ve got one of this card into our lab. I should say it is very price competitive, comparing with other enterprise level PCIe […]
In my raw IO benchmark of Intel 520 SSD we saw that the drive does not provide uniform throughput and response time, but it is interesting how does it affect workload if it comes from MySQL. I prepared benchmarks results for Sysbench OLTP workload with MySQL running on Intel 520. You can download it there.
Following my previous benchmark of Samsung 830, today I want to show results for STEC MACH16 SATA card, 200GB size, this card is based on SLC, and regarding STEC website, it is an enterprise grade storage.
I have a chance to test a system with Intel 320 SSD drives (NewRelic provided me with an access to the server), and compare performance with SAS hard drives.
A lot have been written about Battery Learning Cycle problems and its impact to MySQL Performance. Here are couple of links (1,2). It is good to see though there are some controllers coming out which solve this problem, namely Adaptec 5Z series controllers (Z stands for Zero Maintenance). This is not quite new technology they […]