April 20, 2014

Setting up XFS on Hardware RAID — the simple edition

There are about a gazillion FAQs and HOWTOs out there that talk about XFS configuration, RAID IO alignment, and mount point options.  I wanted to try to put some of that information together in a condensed and simplified format that will work for the majority of use cases.  This is not meant to cover every […]

Aligning IO on a hard disk RAID – the Benchmarks

In the first part of this article I have showed how I align IO, now I want to share results of the benchmark that I have been running to see how much benefit can we get from a proper IO alignment on a 4-disk RAID1+0 with 64k stripe element. I haven’t been running any benchmarks […]

Aligning IO on a hard disk RAID – the Theory

Now that flash storage is becoming more popular, IO alignment question keeps popping up more often than it used to when all we had were rotating hard disk drives. I think the reason is very simple – when systems only had one bearing hard disk drive (HDD) as in RAID1 or one disk drive at […]

Percona Server with TokuDB: Packing 15TB into local SSDs

Two weeks ago we released an Alpha release of Percona Server with TokuDB. Right now I am on a final stage of evaluation of TokuDB for using in our project Percona Cloud Tools and it looks promising.

10 MySQL settings to tune after installation

When we are hired for a MySQL performance audit, we are expected to review the MySQL configuration and to suggest improvements. Many people are surprised because in most cases, we only suggest to change a few settings even though hundreds of options are available. The goal of this post is to give you a list […]

InnoDB scalability issues due to tables without primary keys

Each day there is probably work done to improve performance of the InnoDB storage engine and remove bottlenecks and scalability issues. Hence there was another one I wanted to highlight: Scalability issues due to tables without primary keys This scalability issue is caused by the usage of tables without primary keys. This issue typically shows […]

Tuning MySQL 5.6 configuration – Webinar followup

We had a wonderful time during the Sept. 25 webinar, “MySQL 5.6 Configuration Optimization,” and I got a lot more questions than I could answer during the hour. So here is a followup with answers to the most interesting questions you guys asked. (You can also watch a recording of entire webinar here.) Q: What […]

Inexpensive SSDs for Database Workloads

The cost of SSDs has been dropping rapidly, and at the time of this writing, 2.5-drives have reached the 1TB capacity mark.  You can actually get inexpensive drives for as little as 60 cents per GB. Even inexpensive SSDs can perform tens of thousands of IOPs and come with 1.5M – 2M hous MTBF and […]

InnoDB performance optimization basics (redux)

I recently stumbled upon a post that Peter Zaitsev published back in 2007 titled “Innodb Performance Optimization Basics.” It’s a great post and reading it inspired me to examine what’s changed in the nearly six years that have followed in terms of MySQL, Percona Server – as well as in all of the other now-available […]

Testing Intel, Samsung & SanDisk SATA SSD

While working on the service architecture for one of our projects, I considered several SATA SSD options as the possible main storage for the data. The system will be quite write intensive, so the main interest is the write performance on capacities close to full-size storage. After some research I picked several candidates (I show […]