I spent last week at linux.conf.au in Ballarat, Victoria (that’s the Victoria in Australia, not wherever else there may be one) which is only a pleasant two hour drive from my home town of Melbourne (Australia, not Florida). I sent an email internally to our experts detailing bits of the conference that may interest them [...]
Setting up XFS on Hardware RAID — the simple edition
December 16, 2011 By 9 Comments
There are about a gazillion FAQs and HOWTOs out there that talk about XFS configuration, RAID IO alignment, and mount point options. I wanted to try to put some of that information together in a condensed and simplified format that will work for the majority of use cases. This is not meant to cover every [...]
Make your file system error resilient
August 24, 2011 By 8 Comments
One of the typical problems I see setting up ext2/3/4 file system is sticking to defaults when it comes to behavior on errors. By default these filesystems are configured to Continue when error (such as IO error or meta data inconsistency) is discovered which can continue spreading corruption. This manifests itself in a worst way [...]
Aligning IO on a hard disk RAID – the Benchmarks
June 9, 2011 By 13 Comments
In the first part of this article I have showed how I align IO, now I want to share results of the benchmark that I have been running to see how much benefit can we get from a proper IO alignment on a 4-disk RAID1+0 with 64k stripe element. I haven’t been running any benchmarks [...]
Aligning IO on a hard disk RAID – the Theory
June 9, 2011 By 18 Comments
Now that flash storage is becoming more popular, IO alignment question keeps popping up more often than it used to when all we had were rotating hard disk drives. I think the reason is very simple – when systems only had one bearing hard disk drive (HDD) as in RAID1 or one disk drive at [...]
Lost innodb tables, xfs and binary grep
November 9, 2010 By 12 Comments
Before I start a story about the data recovery case I worked on yesterday, here’s a quick tip – having a database backup does not mean you can restore from it. Always verify your backup can be used to restore the database! If not automatically, do this manually, at least once a month. No, seriously [...]
Virident tachIOn: New player on Flash PCI-E cards market
June 15, 2010 By 19 Comments
(Note: The review was done as part of our consulting practice, but is totally independent and fully reflects our opinion) In my talk on MySQL Conference and Expo 2010 “An Overview of Flash Storage for Databases” I mentioned that most likely there are other players coming soon. I actually was not aware about any real [...]
FlashCache: more benchmarks
May 18, 2010 By 15 Comments
Previously I covered simple case with FlashCache, when data fits into cache partitions, now I am trying to test when data is bigger than cache. But before test setup let me address some concern (which I also had). Intel X25-M has a write cache which is not battery backuped, so there is suspect you may [...]
FlashCache: first experiments
May 10, 2010 By 18 Comments
I wrote about FlashCache there, and since that I run couple benchmarks, to see what performance benefits we can expect. For initial tries I took sysbench oltp tests ( read-only and read-write) and case when data fully fits into L2 cache. I made binaries for FlashCache for CentOS 5.4, kernel 2.6.18-164.15, you can download it [...]
Should I buy a Fast SSD or more memory?
April 8, 2010 By 10 Comments
While a scale-out solution has traditionally been popular for MySQL, it’s interesting to see what room we now have to scale up – cheap memory, fast storage, better power efficiency. There certainly are a lot of options now – I’ve been meeting about a customer/week using Fusion-IO cards. One interesting choice I’ve seen people make [...]
