May 26, 2013

Testing the Micron P320h

April 16, 2013 By 7 Comments

The Micron P320h SSD is an SLC-based PCIe solid-state storage device which claims to provide the highest read throughput of any server-grade SSD, and at Micron’s request, I recently took some time to put the card through its paces, and the numbers are indeed quite impressive. For reference, the benchmarks for this device were performed [...]

Filed Under: Benchmarks, Hardware and Storage, MySQL Tagged With: , , , , ,

Testing the Virident FlashMAX II

March 21, 2013 By 1 Comment

Approximately 11 months ago, Vadim reported some test results from the Virident FlashMax 1400M, an MLC PCIe SSD device. Since that time, Virident has released the FlashMAX II, which promises both increased capacity and increased performance over the previous model. In this post, we present some benchmark results comparing this new model to its predecessor, [...]

Filed Under: Benchmarks Tagged With: , , , ,

MySQL performance: Impact of memory allocators (Part 2)

March 8, 2013 By 12 Comments

Last time I wrote about memory allocators and how they can affect MySQL performance in general. This time I would like to explore this topic from a bit different angle: What impact does the number of processor cores have on different memory allocators and what difference we will see in MySQL performance in this scenario? [...]

Filed Under: Benchmarks, MySQL Tagged With: , , ,

InnoDB Full-text Search in MySQL 5.6 (part 1)

February 26, 2013 By 1 Comment

I’ve never been a very big fan of MyISAM; I would argue that in most situations, any possible advantages to using MyISAM are far outweighed by the potential disadvantages and the strengths of InnoDB. However, up until MySQL 5.6, MyISAM was the only storage engine with support for full-text search (FTS). And I’ve encountered many [...]

Filed Under: Insight for DBAs, Insight for Developers, MySQL Tagged With: , , , , ,

Percona XtraDB Cluster – installation and setup webinar follow up Q&A

October 28, 2012 By 4 Comments

Thanks for all, who attended my webinar, I got many questions and I wanted to take this opportunity to answer them. Q: Even ntp has a delay of 0.3-0.4 between servers does that mean a 0.25 as from logs can be an issue ? A: My demo vms were running for a few hours before [...]

Filed Under: MySQL, XtraDB Cluster

Impact of memory allocators on MySQL performance

July 5, 2012 By 11 Comments

MySQL server intensively uses dynamic memory allocation so a good choice of memory allocator is quite important for the proper utilization of CPU/RAM resources. Efficient memory allocator should help to improve scalability, increase throughput and keep memory footprint under the control. In this post I’m going to check impact of several memory allocators on the [...]

Filed Under: Benchmarks, MySQL

Should MySQL update the default innodb_log_file_size?

November 21, 2011 By 37 Comments

Now that InnoDB is the default storage engine in MySQL, is it time to update the default configuration for the InnoDB log file size (innodb_log_file_size) setting? In general, there are two settings that simply can’t be left at their historical defaults for a production installation. MySQL 5.5 increased the default buffer pool size to something [...]

Filed Under: Insight for DBAs, MySQL

Make your file system error resilient

August 24, 2011 By 8 Comments

One of the typical problems I see setting up ext2/3/4 file system is sticking to defaults when it comes to behavior on errors. By default these filesystems are configured to Continue when error (such as IO error or meta data inconsistency) is discovered which can continue spreading corruption. This manifests itself in a worst way [...]

Filed Under: Hardware and Storage, Insight for DBAs, MySQL

Aligning IO on a hard disk RAID – the Benchmarks

June 9, 2011 By 13 Comments

In the first part of this article I have showed how I align IO, now I want to share results of the benchmark that I have been running to see how much benefit can we get from a proper IO alignment on a 4-disk RAID1+0 with 64k stripe element. I haven’t been running any benchmarks [...]

Filed Under: MySQL

Aligning IO on a hard disk RAID – the Theory

June 9, 2011 By 18 Comments

Now that flash storage is becoming more popular, IO alignment question keeps popping up more often than it used to when all we had were rotating hard disk drives. I think the reason is very simple – when systems only had one bearing hard disk drive (HDD) as in RAID1 or one disk drive at [...]

Filed Under: MySQL
« Older Posts