April 16, 2014

10 MySQL settings to tune after installation

When we are hired for a MySQL performance audit, we are expected to review the MySQL configuration and to suggest improvements. Many people are surprised because in most cases, we only suggest to change a few settings even though hundreds of options are available. The goal of this post is to give you a list […]

Multi Range Read (MRR) in MySQL 5.6 and MariaDB 5.5

This is the second blog post in the series of blog posts leading up to the talk comparing the optimizer enhancements in MySQL 5.6 and MariaDB 5.5. This blog post is aimed at the optimizer enhancement Multi Range Read (MRR). Its available in both MySQL 5.6 and MariaDB 5.5 Now let’s take a look at […]

Looking for RAID Controller without Battery Learning problems ?

A lot have been written about Battery Learning Cycle problems and its impact to MySQL Performance. Here are couple of links (1,2). It is good to see though there are some controllers coming out which solve this problem, namely Adaptec 5Z series controllers (Z stands for Zero Maintenance). This is not quite new technology they […]

Setting up XFS on Hardware RAID — the simple edition

There are about a gazillion FAQs and HOWTOs out there that talk about XFS configuration, RAID IO alignment, and mount point options.  I wanted to try to put some of that information together in a condensed and simplified format that will work for the majority of use cases.  This is not meant to cover every […]

Aligning IO on a hard disk RAID – the Benchmarks

In the first part of this article I have showed how I align IO, now I want to share results of the benchmark that I have been running to see how much benefit can we get from a proper IO alignment on a 4-disk RAID1+0 with 64k stripe element. I haven’t been running any benchmarks […]

More on dangers of the caches

I wrote couple of weeks ago on dangers of bad cache design. Today I’ve been troubleshooting the production down case which had fair amount of issues related to how cache was used. The deal was as following. The update to the codebase was performed and it caused performance issues, so it was rolled back but […]

FlashCache: tpcc workload with FusionIO card as cache

This run is very similar what I had on Intel SSD X25-M card, but now I use FusionIO 80GB SLC card. I chose this card as smallest available card (and therefore cheapest. On Dell.com you can see it for about $3K). There is also FusionIO IO-Xtreme 80GB card, which is however MLC based and it […]

FlashCache: tpcc workload

This is my last post in series on FlashCache testing when the cache is placed on Intel SSD card. This time I am using tpcc-like workload with 1000 Warehouses ( that gives 100GB of data) on Dell PowerEdge R900 with 32GB of RAM, 22GB allocated for buffer pool and I put 70GB on FlashCache partition […]

FlashCache: more benchmarks

Previously I covered simple case with FlashCache, when data fits into cache partitions, now I am trying to test when data is bigger than cache. But before test setup let me address some concern (which I also had). Intel X25-M has a write cache which is not battery backuped, so there is suspect you may […]

FlashCache: first experiments

I wrote about FlashCache there, and since that I run couple benchmarks, to see what performance benefits we can expect. For initial tries I took sysbench oltp tests ( read-only and read-write) and case when data fully fits into L2 cache. I made binaries for FlashCache for CentOS 5.4, kernel 2.6.18-164.15, you can download it […]