April 19, 2014

Intel SSD 910 vs HDD RAID in tpcc-mysql benchmark

I continue my benchmarks of Intel SSD 910, previous time I compared it with Fusion-io ioDrive http://www.mysqlperformanceblog.com/2012/09/07/intel-ssd-910-in-tpcc-mysql-benchmark/. Now I want to test this card against RAID over spinning disks.

10 MySQL settings to tune after installation

When we are hired for a MySQL performance audit, we are expected to review the MySQL configuration and to suggest improvements. Many people are surprised because in most cases, we only suggest to change a few settings even though hundreds of options are available. The goal of this post is to give you a list […]

Intel SSD 910 in tpcc-mysql benchmark

I continue my benchmarks of Intel SSD 910, the raw IO results are available in my previous experiment. Now I want to test this card under MySQL workload to see if the card is suitable to use with MySQL. Benchmark date: Sep-2012 Benchmark goal: Test Intel SSD 910 under tpcc-mysql workload and compare with baseline […]

Testing Intel® SSD 910

Intel came on PCI-e SSD market with their Intel SSD 910 card. With a slogan “The ultimate data center SSD” I assume Intel targets rather a server grade hardware, not consumer level. I’ve got one of this card into our lab. I should say it is very price competitive, comparing with other enterprise level PCIe […]

Looking for RAID Controller without Battery Learning problems ?

A lot have been written about Battery Learning Cycle problems and its impact to MySQL Performance. Here are couple of links (1,2). It is good to see though there are some controllers coming out which solve this problem, namely Adaptec 5Z series controllers (Z stands for Zero Maintenance). This is not quite new technology they […]

Setting up XFS on Hardware RAID — the simple edition

There are about a gazillion FAQs and HOWTOs out there that talk about XFS configuration, RAID IO alignment, and mount point options.  I wanted to try to put some of that information together in a condensed and simplified format that will work for the majority of use cases.  This is not meant to cover every […]

Recovering Linux software RAID, RAID5 Array

Dealing with MySQL you might need to deal with RAID recovery every so often. Sometimes because of client lacking the proper backup or sometimes because recovering RAID might improve recovery, for example you might get point in time recovery while backup setup only takes you to the point where last binary log was backed up. […]

Aligning IO on a hard disk RAID – the Benchmarks

In the first part of this article I have showed how I align IO, now I want to share results of the benchmark that I have been running to see how much benefit can we get from a proper IO alignment on a 4-disk RAID1+0 with 64k stripe element. I haven’t been running any benchmarks […]

Aligning IO on a hard disk RAID – the Theory

Now that flash storage is becoming more popular, IO alignment question keeps popping up more often than it used to when all we had were rotating hard disk drives. I think the reason is very simple – when systems only had one bearing hard disk drive (HDD) as in RAID1 or one disk drive at […]

RAID throughput on FusionIO

Along with maximal possible fsync/sec it is interesting how different software RAID modes affects throughput on FusionIO cards. In short conclusion, RAID10 modes really disappoint me, the detailed numbers to follow. To get numbers I run

test with 16KB page size, random read and writes, 1 and 16 threads, O_DIRECT mode. FusionIO cards are […]