April 21, 2014

Fast storage: 8 SSD Intel X-25M 80GB benchmarks

I appreciate opportunity Jos van Dongen from Tholis Consulting gave me. He granted me access to servers with 8 attached Intel X-25M 80GB MLC cards. The cards attached to 2 Adaptec 5805 raid controllers, with 4 cards per controller. The cost of setup is 8 x 260$ (X-25M) + 2×500$ (Adaptec 5805) = ~3000$. Available […]

SSD, XFS, LVM, fsync, write cache, barrier and lost transactions

We finally managed to get Intel X25-E SSD drive into our lab. I attached it to our Dell PowerEdge R900. The story making it running is worth separate mentioning – along with Intel X25-E I got HighPoint 2300 controller and CentOS 5.2 just could not start with two RAID controllers (Perc/6i and HighPoint 2300). The […]

InnoDB scalability issues due to tables without primary keys

Each day there is probably work done to improve performance of the InnoDB storage engine and remove bottlenecks and scalability issues. Hence there was another one I wanted to highlight: Scalability issues due to tables without primary keys This scalability issue is caused by the usage of tables without primary keys. This issue typically shows […]

A closer look at Percona Server 5.6

Yesterday we announced the GA release of Percona Server 5.6, the latest release of our enhanced, drop-in replacement for MySQL. Percona Server 5.6 is the best free MySQL alternative for demanding applications. Our third major release, Percona Server 5.6 offers all the improvements found in MySQL 5.6 Community Edition plus scalability, availability, backup, and security […]

Tuning MySQL 5.6 configuration – Webinar followup

We had a wonderful time during the Sept. 25 webinar, “MySQL 5.6 Configuration Optimization,” and I got a lot more questions than I could answer during the hour. So here is a followup with answers to the most interesting questions you guys asked. (You can also watch a recording of entire webinar here.) Q: What […]

InnoDB performance optimization basics (redux)

I recently stumbled upon a post that Peter Zaitsev published back in 2007 titled “Innodb Performance Optimization Basics.” It’s a great post and reading it inspired me to examine what’s changed in the nearly six years that have followed in terms of MySQL, Percona Server – as well as in all of the other now-available […]

Considering TokuDB as an engine for timeseries data

I am working on a customer’s system where the requirement is to store a lot of timeseries data from different sensors. For performance reasons we are going to use SSD, and therefore there is a list of requirements for the architecture: Provide high insertion rate Provide a good compression rate to store more data on […]

Virident vCache vs. FlashCache: Part 2

This is the second part in a two-part series comparing Virident’s vCache to FlashCache. The first part was focused on usability and feature comparison; in this post, we’ll look at some sysbench test results. Disclosure: The research and testing conducted for this post were sponsored by Virident. First, some background information. All tests were conducted […]

Testing the Virident FlashMAX II

Approximately 11 months ago, Vadim reported some test results from the Virident FlashMax 1400M, an MLC PCIe SSD device. Since that time, Virident has released the FlashMAX II, which promises both increased capacity and increased performance over the previous model. In this post, we present some benchmark results comparing this new model to its predecessor, […]

How does MySQL Replication really work?

While we do have many blog posts on replication on our blog, such as on replication being single-threaded, on semi-synchronous replication or on estimating replication capacity, I don’t think we have one that covers the very basics of how MySQL replication really works on the high level. Or it’s been so long ago I can’t […]