You searched for using+a+variable+in+mysql+view

Percona Server 5.5.30-30.2 rerelease fixes non-restart issue

April 24, 2013 By Ignacio Nin Leave a Comment

In our last 5.5 series release of Percona Server, we included a regression in the RPM packaging that prevented the server from restarting following an upgrade — instead, the server would remain stopped after the upgrade was completed regardless of its state before updating. This caused some problems for some users, especially if automatic upgrading was configured [...]

Filed Under: MySQL, Percona Software

Percona Server for MySQL 5.5.30-30.2 now available

April 10, 2013 By Hrvoje Matijakovic 8 Comments

Percona is glad to announce the release of Percona Server for MySQL 5.5.30-30.2 on April 10, 2013 (Downloads are available here and from the Percona Software Repositories). Based on MySQL 5.5.30, including all the bug fixes in it, Percona Server 5.5.30-30.2 is now the current stable release in the 5.5 series. All of Percona‘s software is open-source and free, all the details of [...]

Filed Under: MySQL

Investigating MySQL Replication Latency in Percona XtraDB Cluster

March 3, 2013 By Peter Zaitsev 13 Comments

I was curious to check how Percona XtraDB Cluster behaves when it comes to MySQL replication latency — or better yet, call it data propagation latency. It was interesting to see whenever I can get stale data reads from other cluster nodes after write performed to some specific node. To test it I wrote quite a [...]

Filed Under: Benchmarks, Insight for DBAs, MySQL, XtraDB Cluster Tagged With: MySQL Replication Latency, Percona XtraDB Cluster, Peter Zaitsev

InnoDB Full-text Search in MySQL 5.6 (part 1)

February 26, 2013 By Ernie Souhrada 1 Comment

I’ve never been a very big fan of MyISAM; I would argue that in most situations, any possible advantages to using MyISAM are far outweighed by the potential disadvantages and the strengths of InnoDB. However, up until MySQL 5.6, MyISAM was the only storage engine with support for full-text search (FTS). And I’ve encountered many [...]

Filed Under: Insight for DBAs, Insight for Developers, MySQL Tagged With: Ernie Souhrada, FTS, FullText Search, InnoDB, MyISAM, MySQL 5.6

Announcing Percona Server for MySQL version 5.5.29-30.0

February 26, 2013 By Hrvoje Matijakovic Leave a Comment

Percona is glad to announce the release of Percona Server for MySQL version 5.5.29-30.0 on February 26th, 2013 (Downloads are available here and from the Percona Software Repositories). Based on MySQL 5.5.29, including all the bug fixes in it, Percona Server 5.5.29-30.0 is now the current stable release in the 5.5 series. All of Percona‘s software is open-source and free, all the details [...]

Filed Under: Events and Announcements, MySQL, Percona Software Tagged With: MariaDB, MySQL 5.5.29, Percona Server 5.5.29-30.0, Percona Server for MySQL

How does MySQL Replication really work?

January 9, 2013 By Aurimas Mikalauskas 9 Comments

While we do have many blog posts on replication on our blog, such as on replication being single-threaded, on semi-synchronous replication or on estimating replication capacity, I don’t think we have one that covers the very basics of how MySQL replication really works on the high level. Or it’s been so long ago I can’t [...]

Filed Under: Insight for DBAs, MySQL Tagged With: MySQL, Replication, Tips

Review of MySQL 5.6 Defaults Changes

October 8, 2012 By Peter Zaitsev 10 Comments

James Day just posted the great summary of defaults changes in MySQL 5.6 compared to MySQL 5.5 In general there are a lot of good changes and many defaults are now computed instead of hardcoded. Though some of changes are rather puzzling for me. Lets go over them: back_log = 50 + ( max_connections / [...]

Filed Under: Insight for DBAs, MySQL

Measuring the amount of writes in InnoDB redo logs

October 8, 2012 By Stephane Combaudon 4 Comments

Choosing a good InnoDB log file size is key to InnoDB write performance. This can be done by measuring the amount of writes in the redo logs. You can find a detailed explanation in this post. To sum up, here are the main points: The redo logs should be large enough to store at most [...]

Filed Under: Insight for DBAs, MySQL

How to obtain the “LES” (Last Executed Statement) from an Optimized Core Dump?

September 9, 2012 By Roel Van de Paar 9 Comments

Ever ran into a situation where you saw “some important variable you really needed to know about=<optimized out>” while debugging?

Filed Under: Insight for DBAs, Insight for Developers, MySQL

Recovery after DROP & CREATE

August 22, 2012 By Aleksandr Kuzminsky 1 Comment

In a very popular data loss scenario a table is dropped and empty one is created with the same name. This is because mysqldump in many cases generates the “DROP TABLE” instruction before the “CREATE TABLE”:

DROP TABLE IF EXISTS `actor`;
/*!40101 SET @saved_cs_client     = @@character_set_client */;
/*!40101 SET character_set_client = utf8 */;
CREATE TABLE `actor` (
  `actor_id` smallint(5) unsigned NOT NULL AUTO_INCREMENT,
  `first_name` varchar(45) NOT NULL,
  `last_name` varchar(45) NOT NULL,
  `last_update` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
  PRIMARY KEY (`actor_id`),
  KEY `idx_actor_last_name` (`last_name`)
) ENGINE=InnoDB AUTO_INCREMENT=201 DEFAULT CHARSET=utf8;
/*!40101 SET character_set_client = @saved_cs_client */;

DROP TABLE IF EXISTS `actor`;

/*!40101 SET @saved_cs_client = @@character_set_client */;

/*!40101 SET character_set_client = utf8 */;

CREATE TABLE `actor` (

`actor_id` smallint(5) unsigned NOT NULL AUTO_INCREMENT,

`first_name` varchar(45) NOT NULL,

`last_name` varchar(45) NOT NULL,

`last_update` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,

PRIMARY KEY (`actor_id`),

KEY `idx_actor_last_name` (`last_name`)

) ENGINE=InnoDB AUTO_INCREMENT=201 DEFAULT CHARSET=utf8;

/*!40101 SET character_set_client = @saved_cs_client */;

If there were no subsequent CREATE TABLE the recovery would be trivial. Index_id of the PRIMARY index of [...]

Filed Under: MySQL Tagged With: drop table, InnoDB, Recovery

Percona Server 5.5.30-30.2 rerelease fixes non-restart issue

Percona Server for MySQL 5.5.30-30.2 now available

Investigating MySQL Replication Latency in Percona XtraDB Cluster

InnoDB Full-text Search in MySQL 5.6 (part 1)

Announcing Percona Server for MySQL version 5.5.29-30.0

How does MySQL Replication really work?

Review of MySQL 5.6 Defaults Changes

Measuring the amount of writes in InnoDB redo logs

How to obtain the “LES” (Last Executed Statement) from an Optimized Core Dump?

Recovery after DROP & CREATE

Search

Top Searches

Percona Webinars

ABOUT PERCONA

Percona MySQL Training

Percona Careers

SOFTWARE FROM PERCONA

SERVICES FOR MYSQL USERS

ABOUT THIS BLOG AND PERCONA