April 16, 2014

Looking for RAID Controller without Battery Learning problems ?

A lot have been written about Battery Learning Cycle problems and its impact to MySQL Performance. Here are couple of links (1,2). It is good to see though there are some controllers coming out which solve this problem, namely Adaptec 5Z series controllers (Z stands for Zero Maintenance). This is not quite new technology they […]

Aligning IO on a hard disk RAID – the Benchmarks

In the first part of this article I have showed how I align IO, now I want to share results of the benchmark that I have been running to see how much benefit can we get from a proper IO alignment on a 4-disk RAID1+0 with 64k stripe element. I haven’t been running any benchmarks […]

The perils of uniform hardware and RAID auto-learn cycles

Last night a customer had an emergency in selected machines on a large cluster of quite uniform database servers. Some of the servers were slowing down in a very puzzling way over a short time span (a couple of hours). Queries were taking multiple seconds to execute instead of being practically instantaneous. But nothing seemed […]

FlashCache: more benchmarks

Previously I covered simple case with FlashCache, when data fits into cache partitions, now I am trying to test when data is bigger than cache. But before test setup let me address some concern (which I also had). Intel X25-M has a write cache which is not battery backuped, so there is suspect you may […]

SSD, XFS, LVM, fsync, write cache, barrier and lost transactions

We finally managed to get Intel X25-E SSD drive into our lab. I attached it to our Dell PowerEdge R900. The story making it running is worth separate mentioning – along with Intel X25-E I got HighPoint 2300 controller and CentOS 5.2 just could not start with two RAID controllers (Perc/6i and HighPoint 2300). The […]

RAID System performance surprises

Implementing MySQL database in 24/7 environments we typically hope for uniform component performance, or at least would like to be able to control it. Typically this is indeed the case, for example CPU will perform with same performance day and night (unless system management software decides to lower CPU frequency due to overheating). This is […]

10 MySQL settings to tune after installation

When we are hired for a MySQL performance audit, we are expected to review the MySQL configuration and to suggest improvements. Many people are surprised because in most cases, we only suggest to change a few settings even though hundreds of options are available. The goal of this post is to give you a list […]

InnoDB performance optimization basics (redux)

I recently stumbled upon a post that Peter Zaitsev published back in 2007 titled “Innodb Performance Optimization Basics.” It’s a great post and reading it inspired me to examine what’s changed in the nearly six years that have followed in terms of MySQL, Percona Server – as well as in all of the other now-available […]

ZFS on Linux and MySQL

I am currently working with a large customer and I am involved with servers located in two data centers, one with Solaris servers and the other one with Linux servers. The Solaris side is cleverly setup using zones and ZFS and this provides a very low virtualization overhead. I learned quite a lot about these […]

How does MySQL Replication really work?

While we do have many blog posts on replication on our blog, such as on replication being single-threaded, on semi-synchronous replication or on estimating replication capacity, I don’t think we have one that covers the very basics of how MySQL replication really works on the high level. Or it’s been so long ago I can’t […]